Analysis of Superheater Work Under Creep Conditions
Main Article Content
Abstract
The aim of this article is work modelling of superheater SH3. It is made of the austenitic stainless steel Super 304H. Its design temperature T is 604 C, and the design pressure P acting on the inner surface of the pipes is 284 bar. The high temperature is the reason of the superheater work under creep conditions.
Article Details
References
Felkowski Ł., Duda P., Analiza cieplno-
-wytrzymałościowa wężownicy przegrzewacza
pary. Analiza systemów energetycznych,
Węglowski B., Duda P. (red.),
Wydawnictwo Politechniki Krakowskiej,
Kraków 2013, s. 387–401.
Dokumentacja wężownicy przegrzewacza
SH3, Rafako S.A.
The Pressure Equipment Directive
/23/EC (PED).
EN 12952-3 Water-tube boilers and auxiliary
installations. Design and calculation
of pressure parts.
EN 13480-3 Metallic industrial piping.
Design and calculation.6. Bentley Auto Pipe V8i Select series
Edition Workbook (9-24-2013).
Cases of ASME Boiler and Pressure Vessel
Code. Case 2328-2.2010.
Zieliński A., Structure and properties of
Super 304H steel for pressure elements of
boilers with ultra-supercritical parameters,
Journal of Achievements in Materials
and Manufacturing Engineering 2012,
Vol. 55, No. 2, s. 403–409.
Material data for Super 304H. Nippon
Steel & Sumitomo Metal.
Wala T., Hernas A., Dobór materiałów
na przegrzewacze referencyjnego kotła
nadkrytycznego, Prace IMiUE Politechniki
Śląskiej 2009, z. 23, t. III, s. 221–237.
The laboratory results obtained under
the Project Development-Behavioral
Assessment and forecast long-term
operation of new generation steel boiler
elements operated above the temperature
limit – Instytut Metalurgii Żelaza,
Politechnika Krakowska, Rafako S.A.
Naumenko K., Altenbach H., Modeling of
Creep for Structural Analysis. Springer –
Verlag Berlin Heidelberg 2007, s. 1–15.
Osocha P., Określenie stopnia uszkodzenia
wysokociśnieniowych grubościennych
elementów kotłów, rozprawa doktorska,
Kraków 2009.
ANSYS User’s Manual, Revision 12.0 A.
Miroshnik R., Shaked Y., Elmakis D.,
Life Assessment Evaluation of piping
branch connection under creep & fatigue,
International Journal of Pressure Vessels
and Piping 1997, Vol. 8, s. 147–154.