Impact of Connections on Power System State Estimation
Main Article Content
Abstract
Power system state estimation plays an essential role in modern computer systems in a dispatcher centre. Apart from reliability, it should have such features as: high accuracy of results, short performance time in each possible situation, i.e. it should ensure equally beneficial results for different states as well as for different connections in a power system. In the paper, the impact of power system topology on properties of state estimation is considered. To show differences of properties of state estimation for different power system topology, results of analysis for the IEEE 14-bus test system are presented. In the analysis, one takes into account the state of calculation process, the accuracy of estimation results and the number of iterations. At the end, from the point of view of power system state estimation, attention is paid to the most important consequences of a change of power system topology.
Article Details
References
Monticelli A., Electric Power System State Estimation, Proceedings of the IEEE 2002, No. 2 (88), pp. 262–282.
Wu F.F., Moslehi K., Bose A., Power System Control Centers: Past, Present, and Future, Proceedings of the IEEE 2005, No. 11 (93), pp. 1890–1908.
Okoń T., Wilkosz K., WLS state estimation in polar and rectangular coordinate systems for power system with UPFC: significanceof types of measurements, Modern Electric Power Systems, MEPS, September 2010, pp. 1–6.
Okoń T., Wilkosz K., Weighted-least-squares power system state estimation in different coordinate systems, Przegląd Elektrotechniczny 2010, No. 11 (86), pp. 54–58.
Okoń T., Wilkosz K., Influence of UPFC device on power system state estimation, IEEE PES Trondheim PowerTech, June 2011, pp. 1–8.
Gu J.W. et al., The Solution of Ill-Conditioned Power System State Estimation Problems Via the Method of Peters and Wilkinson, IEEE Trans. on Power Apparatus and Systems 1983, No. 10 (102), pp. 3473–3480.
Schweppe F.C., Wildes J., Power System Static State Estimation, Part I–III, IEEE Trans. on Power Apparatus and Systems 1970, No. 1 (89), pp. 120–135.
Jegatheesan R., Duraiswamy K., AC, Multi-terminal DC power system state estimation – a sequential approach, Elec. Machines and Power Systems 1987, No. 12, pp. 27–42.
Larson R.E., Tinney W.F., Peschon J., State Estimation in Power Systems, Part I: Theory and Feasibility, IEEE Trans. on Power Apparatus and Systems 1970, No. 3 (89), pp. 345–352.
www.ee.washington.edu/research/pstca/index.html.
Dopazo J.F. et al., State Calculation of Power Systems From Line Flow Measurements, IEEE Trans. on Power Apparatus and Systems 1970, No. 7 (89), pp. 1698–1708.
Dopazo J.F., Klitin O.A., Van Slyck L.S., State Calculation of Power Systems from Line Flow Measurements, Part II, IEEE Trans. On Power Apparatus and Systems 1972, No. 1 (91), pp. 145–151.