Thermal and Electrodynamic Risk of Residual Current Devices in the Case of Back-Up Protection by Overcurrent Circuit Breakers

Main Article Content

S. Czapp, D. Kowalak, K. Borowski

Abstract







Residual current operated circuit breakers without integral overcurrent protection should be back-up protected. As back-up protection devices, overcurrent circuit breakers are used. The maximum let-through energy and let-through current of the overcurrent devices were evaluated under laboratory conditions. The thermal and electrodynamic risk of residual current devices was analyzed.












 



Article Details

How to Cite
S. Czapp, D. Kowalak, K. Borowski. (2014). Thermal and Electrodynamic Risk of Residual Current Devices in the Case of Back-Up Protection by Overcurrent Circuit Breakers. Acta Energetica, (04), 67–78. https://doi.org/10.52710/ae.309
Section
Articles

References

PN-EN 61008-1:2007P Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCB) – Part 1: General rules.

IEC TR 60755:2008 General requirements for residual current operated protective devices. 2nd edition.

Instalacje elektryczne i teletechniczne. Poradnik montera i inżyniera elektryka [Electrical and communication installations. Fitter and electrical engineer manual], Verlag Dashofer, Part 5. Zabezpieczenia w instalacjach elektrycznych [Protective devices in electrical installations], Warsaw 2005.

Musiał E., Czapp S., Wyłączniki ochronne rożnicowoprądowe. Przegląd i charakterystyka wspołczesnych konstrukcji [Residual current operated circuit breakers. Review and description of state of the art. designs] (2), Informacje o Normach i Przepisach Elektrycznych 2008, No. 109, pp. 3–44.

PN-HD 60269-2:2010E Low-voltage fuses – Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to J.

Supplementary Protectors/Miniature Circuit Breakers. Technical Data Catalog, Numbers 1492-SP Series C, Rockwell Automation Publication 1492-TC010D-EN-P – April 2011.

Czapp S., Kowalak D., Borowski K., Narażenia cieplne i elektrodynamiczne wyłącznikow rożnicowoprądowych przy ich dobezpieczaniu wyłącznikami nadprądowymi instalacyjnymi, Referat konferencyjny [Thermal and Electrodynamic Risk of Residual Current Devices in the Case of Back-Up Protection by Overcurrent Circuit Breakers, Conference paper], XVI International Conference „Present-Day Problems of Power Engineering” APE’13, Jurata 12–14.06.2013, in: Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej 2013, No 33 [The Scientific Papers of Faculty of Electrical and Control Engineering], s. 115–118.