Nuclear Power Plants in the National Power System
Main Article Content
Abstract
The article presents the operational specifications of selected nuclear power plants and their power output systems. The cooperation of a nuclear power plant with the power system is presented in normal as well as disturbed states, e.g. a nuclear power plant’s house load operation. In addition, global trends in energy safety of nuclear power plants and the power system are discussed. Measures to improve the National Power System’s safety are pointed out to..
Article Details
References
AEN NEA, Technical and Economic Aspects of Load Following with Nuclear Power Plants, 2011.
Analysgroup at Kärnkraftsäkerhet och Utbildning AB (KSU), The Forsmark incident 25th July 2006, 2006.
Aronovich I., Coping with winter night cascade disturbance in Israel, 2016.
CIGRE WG B3.12, Obtaining Value from On-Line Substation Condition Monitoring, 2011.
Comsan M., Status of development of nuclear power reactor development, Egypt 2007.
DIDELSYS Task Group Report, Defence in Depth of Electrical Systems and Grid Interaction, 2009.
IAEA Nuclear Energy Series, Accident Monitoring Systems for Nuclear Power Plants, 2015.
IAEA Safety Standards, Design of Electrical Power Systems for Nuclear Power Plants, 2016.
IAEA, Advanced Power Reactor 1400 MWe (APR1400), 2011.
IAEA, Electric Grid Reliability and Interface with Nuclear Power Plants, 2012.
IAEA, Nuclear Power Plant Design Characteristics, Structure of Nuclear Power Plant Design Characteristics in the IAEA Power Reactor Information System (PRIS), 2007.
IAEA, Operating Experience with NPP, 2016.
IAEA, Status report 78 – The Evolutionary Power Reactor (EPR), 2011.
IAEA, Status report 99 – ATMEA1 (ATMEA1), 2011.
IEEE Task Force on Turbine-Governor Modelling, Dynamic Models for Turbine-Governors in Power System Studies, 2013.
Jönsson J. et al., “Standard Procedure for Grid Interaction Analysis”, Nuclear Energy Agency of the OECD (NEA), 2015.
Lamell P., “Electrical Dynamic Simulation Activities in Forsmark NPP”, Paris 2014.
Leibstadt, Leibstadt Nuclear Power Plant – Technical Description, 2011.
Łowczowski K., “Bezpieczeństwo energetyczne w kontekście budowy elektrowni jądrowej w Polsce” [Energy safety in the context of the construction of a nuclear power plant in Poland], Poznań 2016.
Łowczowski K., “Nuclear Power Plant in the context of Polish Power System”, Saclay, 2014.
OECD, CSNI Technical Opinion Papers, No. 16 Defence in Depth of Electrical Systems, 2013.
Oziemblewski K., Opala K., “Stabilność statyczna systemów elektroenergetycznych (SEE). Kołysania mocy” [Static stability of power systems. Power swings], Energetyka, No. 10, 2015.
Pioro I., Kirillov P., “Current status of electricity generation at nuclear power plants, Materials and processes for energy: communicating current research and technological developments”, 2013.
Reński A. et al., “Nuclear Co-generation – The Analysis of Technical Capabilities and Cost Estimates”, Acta Energetica, No. 3/28, 2016.
Schulz T.L., AP1000 Nuclear Power Plant, 2008.
Sohn S.W. et al., “Evaluation of Load Rejection to House Load Test at 100% Power for UCN 3”, Proceedings of the Korean Nuclear Society Autumn Meeting, Seoul Korea 1998.
Svensson B., Lindahl S., Karlsson D., “Standard Procedure for Grid Interaction Analysis”, Nuclear Energy Agency of the OECD (NEA), 2015.
Tuscano S., “Automatic Voltage Regulator and Power System Stabilizer Type Tests for Russian Certification”, Orlando, 2012.
Westinghouse, 10. Steam and Power Conversion System, AP1000 Design Control Document, revision 19.
Wu G. et al., “Interaction and Coordination among Nuclear Power Plants, Power Grids and Their Protection Systems”, Energies, No. 9(4), 2016.
Zimmer H., Asmah M.W., Hanson J., “Influences of Excitation Systems on the Dynamic Voltage Behavior of Power System”, 2015.
Prabakaran S., Pradeep G., “A Study on Turbine Blade Fatigue Protection”, Guwahati, India, 2014.